How to Remove Levolor Cordless Cellular Shades from Brackets

Cordless cellular shades are light-blocking and privacy-enhancing window coverings that are flexible, versatile, and visually pleasing additions to your home décor. Many homes consider them an essential household item because of their elegant style. Their presence on the windows adds an extra layer of insulation, reducing UV rays and unnecessary heat from entering your house. When you want to decorate, paint, have your windows fixed, or have a deep clean of your home, you’ll need to know how to remove levolor cordless cellular Shades from brackets in detail so that you can do a decent job and avoid destroying the shades.

The first step to removing cordless cellular shades from brackets is to bend any hold-down brackets away from the shade’s bottom bar and separate the shade’s bottom from them. If the brackets are stiff, pry them off using a screwdriver. You then raise the shade to a depth of about 4 inches. This keeps the majority of the cellular shade out of the way of the brackets and gives you access to the front and rear. Uncover the shade apart by inserting the flat head screwdriver between the tab on the bottom of a bracket and the top rail of the shade. The headrail will be released as a result of this action.

Replace the remaining brackets in the same way, but leave the central support bracket in place. If no support brackets are available, have a friend hold the rail to keep it from falling. Tilt the rear of the rail towards your direction. The front of the rail should now be free of the bracket’s catch, while the end brackets should be removed from the rail. To release the rail from central support, raise it up and towards you.

An image of Redi Shade Easy Lift Trim-At-Home Cordless Pleated Light Filtering Fabric Shade (Fits Windows 19"-30"), 30 Inch x 64 Inch, Natural, one of the best cordless cellular shades in use to regulate light and for security in kitchen windows

Step by step process on how to remove Levolor cordless cellular shades from bracket

Step 1

Bend any hold-down brackets away from the shade’s bottom bar to disengage the shade’s bottom from the brackets. If the brackets are stubborn, use a screwdriver to let them loose by twisting them in the notch towards the top and bottom. To pull the clip up and away, push the flat head screwdriver handle. Carry on with the other bracket in the same manner. If you can’t find the slot, remove the headrail away from the window and use a flathead screwdriver to push up the center of the brackets while pulling the shades down.

Step 2

Raise the shade, so it hangs approximately 4 inches deep after you’ve opened the brackets. This keeps the shade out of the way of the brackets and allows you to reach the front and rear of the brackets.

Step 3

Insert a flat-head screwdriver between the tab on the bottom of the bracket and the top rail of the shade to unscrew it and uncover it. The headrail will be released as a result of this action. Replace the remaining brackets in the same way, but leave the central support bracket in place.

Step 4

To remove the bracket, incline the back of the rail down toward you. The front of the rail should now be free of the bracket’s hold. The end brackets should now be removed from the rail. To remove the rail from a central support bracket, hoist it up and toward you. Placing the shades on a clean, level surface is a good idea.

The video below provides an elaborate step to the removal of levolor style blinds from hacks or brackets

How do you take down horizontal blinds?

Before taking down horizontal blinds, you need first to evaluate whether they have a valance and take it off. The majority of valances include a clip that attaches it to the top of the headrail. The valance is removed by lifting it away from the blinds.

Using a flathead screwdriver, open the brackets on the headrail. The blinds’ headrail and mounting brackets can be seen once the valence is removed. Each end of the headrail will have a bracket. The brackets resemble little doors that you will use a flathead screwdriver to open. Uplift the bracket by wedging the screwdriver’s head between the bracket and the headrail.

Similarly, open the bracket on the other end. When you start pushing on the headrail, it normally doesn’t fall out. Keep a firm grip on it perpetually in case it comes loose after you’ve opened the brackets.

To remove the blinds from the wall, pull the headrail toward you. Nothing will keep the headrail in place once the brackets are opened. Therefore you should keep both of your hands on the headrail to prevent it from falling. Then, to remove it, slide it away from the wall. As you move the headrail down toward you, balance it with both hands. After that, place it on a clean, flat surface.

Remove the brackets from the wall by unscrewing them. The metal wall mounting brackets will be left in place. In case you want to remove the brackets use a power drill with a Philips head bit. Use it to loosen the screws by rotating the screws in counterclockwise motions. Pull the loosened screws and brackets off the wall to finish. If you want to put the blinds back up, you can leave the brackets in place.

The cordless cellular shades can be bought from amazon.com. An example of these exemplary units is Redi Shade Easy Lift Trim-At-Home Cordless Pleated Light Filtering Fabric Shade. Click the link below to buy.

 

Buy On Amazon

 

 

How Do you Hang Blinds without Brackets?

Step 1

Drill two holes about 1 inch towards the inside from each end through the face of the headrail. Use a drill with an adequate drill bit to enable the screws to go through the headrail. Driving the screws into the wall will prevent the headrail from fracturing. Examine the headrail to find out if you have achieved a desirable single-direction engagement.

Step 2

Center the headrail over the window and put the top window trim beneath the headrail. Set a bubble level on top of the headrail and align the blind with the top window trim. Put a screw in each hole on the headrail and insert the screws into the wood to mark the holes you drilled to get an indent.

Step 3

Using the drill and a drill bit half the size of your screws, drill one-inch pilot holes into the top window trim. Set the top window trims beneath the headrail, and position the rail over the holes. Use two-inch drywall screws to attach the headrail to the window.

How do you clean Venetian blinds without taking them down?

Many individuals employ the simplest approach of lightly dusting their blinds using the lightest feather or fluffy duster. However, you should dust each slat by rubbing them with a dry cloth for a more thorough clean. Other people prefer to use old socks, white cotton gloves, antistatic cloths, or even tumble dryer wipes as alternatives to a dry cloth. Many household stores also sell exclusive Venetian blind slat cleaning chemicals. These look like culinary tongues with felt pads and can clean up to three slats at once.

If any of the slats have stains, markings, or grease, you may need to add a small amount of water and possibly a cleaning solution to the operation. Many other cleaning solutions, such as window cleaner and dishwashing liquid, have proved successful. Even special ‘venetian blind cleaning sprays‘ on the market claim to leave the blind slats in an antistatic state, reducing the amount of dust drawn to the slat subsequently.

Nevertheless, it is best to verify with your blind manufacturer first to see if the cleaning solution is appropriate. It’s also a good idea to try the solution on a tiny area beforehand. If you’re going to use water or a cleaning solution, only use a small amount on one cloth at a time.

Cleaning the slats of a Venetian blind using a vacuum cleaner is another popular way. This is best accomplished with an upholstery attachment or the comparable unique venetian blind cleaning accessories available. If you opt to use a vacuum cleaner, ensure the suction is not too high, as the vacuum may cause the slats to fold and damage them. Venetian blind slats made of pic and aluminum are especially prone to this, so be cautious. If your machine’s suction is adjustable, start at the lowest setting and gradually increase the suction until the best effect is achieved without destroying the slats.

 

Buy On Amazon

 

How to Release Blinds

To lower your blinds, carefully pull the cords at an angle toward the center, in the opposite direction from where the cord is placed. Make sure the cords are parallel to the headrail when doing so. Tension is applied to the pawl when you pull the rope. This loosens the cord lock and lowers the blinds.

If you try the method above and your cords don’t lower, you will have to consider removing the blinds from the bracket to troubleshoot the problem. To remove the blinds from the bracket, start by opening the brackets using a screwdriver. Once the brackets are open, pull the blinds to remove them and place the blinds on a clean surface.

Remove the screws holding the brackets in place with a drill, then store the brackets and screws carefully. To gain access to the pawl, which is positioned behind the lock mechanism, remove the headrail. Examine the pawl to check whether it is locked in place; if so, this might be the cause of your blind not lowering.

Press down on the pawl with a flat head screwdriver while maintaining a 90-degree angle between the blades and the roller. Pressing on the pawl advances it to a lower position, allowing the blinds to be released. Examine the orientation of the cords to ensure they are not twisted or tangled

Frequently Asked Questions

Can I wash cellular shades?

Your cellular blinds may be cleaned to remove stains and grime. Spot clean any dirt stains with a moderate detergent and warm water. If you use bleach or stain removers, the dye in your cellular colors will be removed.

How do I take down mini blind?

Remove the valance and its clips by pulling the slats and bottom rail up to the headrail. Slide the blind out of the brackets by opening the hatch door on the installation brackets. Some cordless micro blinds will have a rear or top mount installation bracket hidden behind them. To get the blind to move forward, you’ll have to drag it forward to see the installation bracket, put a flat head screwdriver between the bracket and headrail, and turn it to release the blind.

Conclusion

Cellular cordless blinds are becoming increasingly popular in homes as window coverings. Their appeal stems from their various advantages and attractive designs. As a result, a homeowner must know how to remove cellular shades from brackets for the efficient use and convenience that this unit comes with. I hope you benefit from the article.

Other Related Articles

https://cordlessguy.com/best-cordless-roman-shades/

https://cordlessguy.com/how-to-restring-cordless-cellular-shades/

https://cordlessguy.com/can-you-shorten-cordless-blinds/

https://cordlessguy.com/pros-and-cons-of-cordless-blinds/