How to fix Levelor cordless blinds

Welcome to the world of convenience and style with Levolor cordless blinds! These innovative window treatments offer a sleek and modern look while eliminating the hassle of cords. However, even the best blinds can face issues over time. Broken cords, stuck slats, and pesky faulty mechanisms can disrupt your daily sunlight routine.

In this DIY guide, we’re diving into easy and effective methods to revive your Levolor cordless blinds at home. From quick fixes to savvy solutions, we’ve got you covered.

Say goodbye to blind troubles and hello to a home filled with effortlessly chic window coverings! Let’s dive in

How to fix levelor cordless blinds: The image shows a cordless blind in use in a home toregulate lighting in a living room

How to Fix Levelor Cordless Blinds

Method 1: How to Repair Levelor Blinds with Broken Cords

Broken cords in Levolor blinds can significantly impact both their functionality and appearance. Here’s how broken cords can affect the blinds and the signs and symptoms to look out for:

Effects on Functionality:

  1. Uneven Slats:

One of the most noticeable effects of broken cords is uneven slats. When a cord that supports the slats is broken, the affected section of the blinds may tilt or hang at an angle, causing an irregular appearance.

  1. Loose Tension:

Broken cords can result in loose tension within the blinds. The tensioning system relies on the cords to keep the blinds taut and in the desired position. When cords break, the tension is compromised, leading to sagging or uneven blinds.

  1. Inability to Raise or Lower:

The lifting mechanism of Levolor blinds relies on a system of cords. If one or more of these cords break, the blinds cannot raise or lower properly. This can be frustrating and inconvenient, especially when controlling light and privacy.

  1. Tangled or Jammed Cords:

Broken cords can sometimes lead to entanglement or jamming of the cords within the headrail. This can further impede the smooth operation of the blinds.

Effects on Appearance:

  • Crooked or Tilted Blinds:

When viewed from the front, the blinds may appear crooked or tilted with broken cords. This not only affects the aesthetics but also indicates a functional issue.

  • Slats Hanging at Different Heights:

If the cords supporting the slats break, the affected slats may hang at different heights, creating an uneven and unattractive appearance.

  • Visible Damage:

In some cases, broken cords may lead to visible damage, such as frayed or dangling cords. This detracts from the appearance of the blinds and can pose safety hazards, especially in homes with children or pets.

Signs and Symptoms of Broken Cords:

  1. Slats Are Uneven: One of the most obvious signs is when the slats of the blinds are not level, and some may be noticeably lower or higher than others.
  2. Blinds Sagging: If the blinds appear to sag in the middle or on one side, it could indicate broken cords affecting the tension.
  3. Resistance When Operating: If you encounter increased resistance or difficulty when raising or lowering the blinds, it may be due to broken cords hindering the smooth operation.
  4. Visible Frayed or Broken Cords: Inspect the cords visually. If you notice frayed or broken cords, it indicates they need replacement.
  5. Inability to Control Tilt: Broken cords may also affect the ability to control the tilt of the slats, causing them to be stuck in one position.

How to Repair Levelor Blinds with Broken Cords

Repairing Levolor blinds with broken cords can be tricky, but it is possible to do it yourself with patience and the right tools. Here’s a general guide to help you repair Levolor blinds with broken cords:

Materials Needed:

  1. Replacement cord (available at hardware stores or online)
  2. Screwdriver
  3. Pliers
  4. Scissors
  5. Small flathead screwdriver or needle-nose pliers
  6. Cord lock if needed


  1. Remove the Blinds:

Take down the blinds from the window. Most Levolor blinds have a mounting bracket that can be easily released.

  1. Open the Headrail:

Use a screwdriver to open the headrail of the blinds. Look for small screws or clips that hold the headrail together. Once the headrail is open, you can access the internal components.

  1. Locate the Broken Cord:

Identify the broken cord. Levolor blinds typically have a ladder-like system of cords that hold the slats. Locate the broken cord that needs replacement.

  1. Remove the Broken Cord:

Use pliers or a small flathead screwdriver to carefully remove the broken cord from the cord lock and any other components it’s threaded through. Take note of how the cord is threaded through the blinds.

  1. Measure and Cut the Replacement Cord:

Measure the length of the broken cord and cut a replacement cord of the same length. It’s essential to use a cord with the same thickness and strength.

  1. Thread the Replacement Cord:

Thread the replacement cord through the cord lock and the other components, following the same path as the original cord. Use a small flathead screwdriver or needle-nose pliers to help guide the cord through tight spaces.

  1. Secure the Cord:

Tie a secure knot at the end of the cord after threading it through all the necessary components. Ensure the cord is securely attached to the bottom rail and other parts.

  1. Test the Blinds:

Before closing the headrail, test the blinds to ensure the cord operates smoothly and that the blinds tilt and lift as expected.

  1. Close the Headrail:

Once you’re satisfied with the repairs, close the headrail, and secure it back in place using screws or clips.

  1. Reinstall the Blinds:

Hang the blinds back on the mounting brackets. Make sure they are level and operate correctly.

If the cord lock is damaged, you may need to replace it with a new one, usually available at hardware stores. Follow the manufacturer’s instructions for replacing the cord lock.

Method 2: How to Repair Levelor Blinds with Stuck Slats

Effects of Stuck Slats:

Stuck slats in Levolor blinds can affect both functionality and appearance:

  • Limited Light Control:

Stuck slats may hinder the blinds’ ability to provide optimal light control. This can be problematic when you want to adjust the amount of sunlight entering a room.

  • Uneven Appearance:

When some slats are stuck in a different position than others, it can result in an uneven and unattractive appearance.

  • Impaired Privacy:

Stuck slats may compromise the blinds’ privacy, as they may not fully close or open.

Causes and Effects of Stuck Slats:

  1. Dirt and Dust Buildup: Accumulated dirt and dust can interfere with the smooth movement of slats, causing them to stick.
  2. Humidity: High humidity levels can lead to slats expanding or warping, making them stuck.
  3. Misalignment: If the blinds are not properly aligned, it can cause the slats to bind against each other.

Materials Needed:

  1. Soft cloth or sponge
  2. Mild detergent or vinegar
  3. Spray bottle
  4. Hair dryer or fan
  5. Flathead screwdriver or butter knife

Step-by-Step Guide:

Step 1: Remove the Blinds

  • Take down the blinds from the window, following the manufacturer’s instructions.

Step 2: Lay the Blinds Flat

  • Lay the blinds flat on a clean surface, making it easier to access the slats.

Step 3: Clean the Slats

  • Mix mild detergent or vinegar with water in a spray bottle.
  • Spray the solution onto a soft cloth or sponge.
  • Wipe down each slat, highlighting areas with visible dirt or dust.

Step 4: Rinse and Dry

  • Use a clean, damp cloth to rinse the slats.
  • Dry the slats thoroughly with a hair dryer or fan to prevent warping.

Step 5: Check for Misalignment

  • Examine the blinds for misalignment.
  • Gently adjust any misaligned slats to ensure they are in their correct position.

Step 6: Use a Screwdriver or Knife

  • Use a flathead screwdriver or a butter knife if the slats are still stuck.
  • Gently pry between the stuck slats to loosen them.

Step 7: Test and Reinstall

  • Test the blinds to ensure that all slats move freely.
  • Reinstall the blinds according to the manufacturer’s instructions.

Tips and Warnings:

  1. Regular Cleaning: Clean the slats regularly to prevent dirt and dust buildup, reducing the likelihood of slats sticking.
  2. Avoid Harsh Chemicals: Use mild cleaning agents to avoid damaging the blinds. Harsh chemicals can affect the finish and functionality.
  3. Thorough Drying: Ensure the slats are thoroughly dry after cleaning to prevent mold and mildew growth.
  4. Gentle Force: Use gentle force when prying slats to avoid damage. If excessive force is needed, reassess for potential misalignment issues

Method 3: How to Repair Levelor Blinds with Faulty Mechanisms

Effects of Faulty Mechanisms:

Faulty mechanisms in Levolor blinds can lead to various issues affecting both functionality and appearance:

  1. Difficulty in Operation: Faulty mechanisms may result in difficulty adjusting the blinds, such as tilting the slats or raising/lowering the blinds.
  2. Uneven Slats: A malfunctioning mechanism can cause uneven slats, disrupting the uniform look of the blinds.
  3. Sagging or Drooping: A faulty tension mechanism can lead to sagging or drooping blinds, impacting their aesthetic appeal.

Types and Functions of Mechanisms in Levolor Blinds:

  • Wand Tilt: Controls the angle or tilt of the slats by turning a wand.
  • Cordless Lift: Enables raising and lowering of the blinds without the need for cords.
  • Cordless Top Down Bottom Up: Allows for independent adjustment of the top and bottom sections of the blinds.

Signs and Symptoms of a Faulty Tension Mechanism:

  1. Sagging Blinds: Blinds may sag in the middle or on one side.
  2. Drooping Slats: Slats may droop or hang unevenly.
  3. Difficulty in Operation: Resistance or difficulty when tilting or adjusting the blinds.

Materials Needed:

  1. Phillips screwdriver
  2. Replacement mechanism (matching the model and size of the original)
  3. Drill and drill bits (optional)
  4. Level (optional)

Step-by-Step Guide:

Step 1: Remove the Blinds

  • Take down the blinds from the window, following the manufacturer’s instructions.

Step 2: Identify the Faulty Mechanism

  • Determine the faulty mechanism (wand tilt, cordless lift, etc.).

Step 3: Remove the Old Mechanism

  • Use a Phillips screwdriver to remove any screws holding the faulty mechanism in place.
  • Carefully detach the old mechanism from the blinds.

Step 4: Install the Replacement Mechanism

  • Align the new mechanism with the existing holes or marks on the blinds.
  • Secure the replacement mechanism with screws

Step 5: Optional – Use a Drill and Level

  • Use a drill and drill bits to create new holes for the replacement mechanism if needed.
  • Use a level to ensure the mechanism is installed straight and level.

Step 6: Test the Blinds

  • Test the blinds to ensure that the new mechanism operates smoothly.

Tips and Warnings:

  1. Check Warranty and Manual: Review the warranty and manual before attempting repairs. The warranty may cover some repairs.
  2. Contact Manufacturer or Retailer: If you need assistance or replacement parts, contact the manufacturer or retailer.
  3. Power Off and Remove Batteries: If the blinds have motorized components, turn off the power and remove the batteries before working on the mechanisms.
  4. Align and Secure Properly: Ensure the replacement mechanism is aligned properly and securely to prevent future issues.

There are a number of the most effective cordless blinds you can find in the market today. Among the top units is the Achim Home Furnishings Cordless Morningstar 1″ Light Filtering Mini Blind, Width 35inch. You can find this unit at Use this product link to purchase this exclusive unit.

Buy On Amazon

The video below show how to fix a levolor cordless blind that won’t go up or down


.Another exemplary cordless blind unit you will fancy having from Amazon is Easy Lift Trim-at-Home Cordless Cellular Blackout Fabric Shade Natural, 30 in x 64 in, (Fits windows 19″- 30″). 

Click the link below to buy;

Buy On Amazon

Redi Shade 3512158 Trim-at-Home Light Filtering Fabric Natural in use in a room to ensure privacy, showing the importance of the best cordless blind units

Final thoughts

This DIY guide unlocks the simplicity and effectiveness of fixing Levolor cordless blinds at home. From tackling broken cords to addressing stuck slats and faulty mechanisms, our methods empower you to restore functionality and style effortlessly. Dive into these straightforward steps and transform your blinds with ease. We encourage you to try these techniques, share your feedback, and connect with a thriving DIY community. Explore our website or discover products to enhance your home for more handy guides and exciting DIY content. Thank you for investing your time and curiosity. Your window to a hassle-free, chic living awaits!

Other Related Articles

Related articles

Scroll to Top